The 200 Watt heating systems can be used with tiled / stone floors where the sub floor is concrete or Marmox Insulation Board. They are ideal to act as the primary heating source or just to provide floor warming for comfort. The 200 Watt heating mats are fantastic for use in Conservatories or in rooms where with high heat loss.

The 200 Watt mats are pre-fabricated mesh mats with the heating cable attached at the correct spacing to provide a heat output of 200 Watts per square metre. The heating mats are fast and easy to fit using the ?cut and trim? method of the backing MESH only. The mats have a fully self adhesive backing which allows 100% contact with the sub floor ansd eliminiates the need for double sided tape or a glue gun.

The 200 watt Heating Mats have the following specifications:-

The Heating Mats are all 50 cm wide.

The Heating mats come in a variety of lengths from 1.5m to 20m providing coverage of 0.75 to 10.0 SQM.

The (black) Heating Cable used in the heating mats is 2.8mm thick and twin conducting, meaning there is only one connection point.

The Heating Mats have a fully self adhesive backing so there is no need for double sided tape or a glue gun to secure to the sub-floor.

The Heating Mats (blue) mesh backing (not the black heating cable) can be cut to fit any room shape.

This item is a Heating Mat Kit, which includes a Digital Programmable Thermostat. It can be used in combination with other 200 watt Heating Mat(s) to extend the area of coverage. If the room you wish to heat requires more than 3600 watts of heating, you will either need an additional thermostat (our thermostats on their own have a 3,600 watt capacity) or have your electrician install an Electrical Contactor